Product Description
Features
Specifications
- The NPS45 amalgamates Napoleon’s superior pellet performance with the convenience of complete automation. The NPS45 has a purge cycle which automatically cleans the burn pot of residue at start-up, shutdown and every 60 minutes, substantially reducing the frequency of cleaning cycles.
Pictured to the left with optional hopper extenstion which increases capacity to 80 pounds. - • For maximum comfort, the NPS45 allows for convection blower adjustments, no matter what the heat setting is at
- • Flashing light warns you when fuel is expended
- • Fine-tuning adjustment modifies combustion air and/or pellet feed rate to the burn pot to compensate for poor quality pellets and/or venting variances
- • Purge cycle (on start-up, shutdown and every 60 minutes) cleans the burn pot of residue depositing it in the ash pan
- • From 8,000 to 40,000 BTU's (may vary depending on pellet quality)
- • Concealed, large capacity ash pan
- • FAILSAFE™ auto ignition and auger system allows you to start the fire quickly and easily
- • Large 55 lb, easy-loading hopper for up to 55 hours of continuous, trouble free operation (55lb capacity allows for a full 40lb bag of pellets to be added while 15lbs still remain in the hopper, eliminating the inconvenience of partial bags)go green
- • Easy to access, automated control panel
- • 3" or 4" pellet vent
- • A Napoleon® Go Green environmentally friendly product: pellet fuel is a renewable resource
- • Certified for bedrooms, bathrooms, bed sitting rooms and mobile homes
- • President’s Limited Lifetime Warranty
- • For maximum comfort, the NPS45 allows for convection blower adjustments, no matter what the heat setting is at
- • BTU Output 8,000-43,000
- • Hopper Capacity 55 lbs expandable to 80 lbs.
- • Area Heated (Sq. ft.) Up to 2,000
- • Burn Rate (lbs/hr) 1-5
- • Burn Time (low burn) 55 hours
- • Flue Diameter 3"
- • Electrical Rating 115 Volts 3.6 Amps, 60Hz
- • Mobile Home Approved: Yes
- • Blower Kit Available Included
- • THIS HEATER HAD BEEN TESTED TO
- • ASTM E 1509, UL 1482, ULC S627
- • CLEARANCES
- • (must be installed on a non-combustible floor protector extending 6" in front and both sides
- • Corner 2" Rear 3" Sides 6"
- • BTU Output 8,000-43,000